Scientific Linux (SL) Release 3.0.2      			June 21, 2004

This is Scientific Linux. 

Please read this entire document before installing.  

This is based on the rebuilding of RPMS out of SRPMS's from Enterprise 3 AS 
including Update 2

Please send bug reports and suggestions to scientific-linux-devel@fnal.gov
 
Changes compared to Scientific Linux 3.0.1 (stable version) are indicated 
by a "*".

--------------------------------------------------------------------------
Table of contents

	DOWNLOAD INFO
	ADDED compared to Enterprise 3 
	UPDATED compared to Enterprise 3 
	Installer modifications
	Site Info
	/contrib 
	/notsupported 
	SRPMS
	MISC Notes
	HARDWARE SPECIFIC ISSUES
	SOFTWARE ISSUES/BUGS
	INFO
	HARDWARE REQUIREMENTS
	ERRATA
_____________________________________________________________________________
DOWNLOAD INFO
_____________________________________________________________________________

*	ftp://ftp.scientificlinux.org/linux/scientific/302/

	rsync access available upon request.

-----------------------------------------------------------------------------
ADDED compared to 3 
-----------------------------------------------------------------------------
From Developer Suite

	eclipse-2.1.0-22.i386.rpm

From Cluster Suite

	clumanager-1.2.3-1.i386.rpm
        ipvsadm-1.21-9.ipvs108.i386.rpm
        piranha-0.7.6-1.i386.rpm
        redhat-config-cluster-1.0.0-5.noarch.rpm

Korn shell from ATT

	ksh93-2000.10.31.0-1.i386.rpm

IceWM

        A small and fast window manager.  Good for slower systems or
        systems with not much memory.  It is put it in the graphical login's
 	session list if installed.

       	icewm-1.2.13-3.i386.rpm
 	icewm-l10n-1.2.13-3.i386.rpm

*mpg321, xmms-mp3, libmad, libid3tag

         Because of licensing reasons RedHat did not include MP3 support
         in their distribution.  While this does not fill all cases, this
         does allow some of the more popular music players to use mp3's.
	 libmad and libid3tag were added for dependancy reasons.
 
         	mpg321-0.2.10-4fr.i386.rpm
*		xmms-mp3-1.2.7-1.i386.rpm
		libmad-0.15.1b-1.fr.i386.rpm
		libmad-devel-0.15.1b-1.fr.i386.rpm
		libid3tag-0.15.1b-1.fr.i386.rpm
		libid3tag-devel-0.15.1b-1.fr.i386.rpm

MISC
 	Added these rpms because they are important as RedHat removed them.
 
	 	anacron-2.3-29.i386.rpm  	from Fedora Core 1
 		gv-3.5.8-23.i386.rpm  		from Fedora Core 1
 		ncurses4-5.0-12.i386.rpm  	from Fedora Core 1
 		readline41-4.1-17.i386.rpm 	from Fedora Core 1
 		xcdroast-0.98a14-2.i386.rpm	from Fedora Core 1
		jpilot-0.99.6-1.i386.rpm 	from Fedora Core 1
		sndconfig-0.70-2.i386.rpm	from Fedora Core 1
 		cdda2wav-2.0-11.i386.rpm        dependency of xcdroast	

	RedHat added the following rpms as part of Update 1

		elfutils-libelf-devel-0.91-3.i386.rpm
		jaf-20030319-1.i386.rpm
		javamail-20031006-1.i386.rpm
		junit-3.8.1-1.i386.rpm
		mtx-1.2.18-1.i386.rpm
		rh-postgresql-pl-7.3.4-8.i386.rpm
		rh-postgresql-server-7.3.4-8.i386.rpm
		rh-postgresql-test-7.3.4-8.i386.rpm
	
*	RedHat added the following rpms as part of Update 2
*
*		net-snmp-perl-5.0.9-2.30E.3.i386.rpm
*		imap-utils-2002d-8.i386.rpm
*		java-javadoc-1.5.33-1jpp_4rh.noarch.rpm
*		jpackage-utils-1.5.33-1jpp_4rh.noarch.rpm
*		laus-0.1-56RHEL3.i386.rpm
*		laus-devel-0.1-56RHEL3.i386.rpm
*		laus-libs-0.1-56RHEL3.i386.rpm
*		pam_passwdqc-0.7.5-1.i386.rpm
*		php-devel-4.3.2-11.ent.i386.rpm
*		rhgb-0.11.2-4.i386.rpm
*		sg3_utils-1.06-2.i386.rpm

*rhgb
*	Remove Red Hat from rpm.
*		rhgb-0.11.2-5.SL.i386.rpm

pine

 	RedHat removed because of license issues .
 
 		pine-4.58-2.i386.rpm

Performance Co-Pilot (PCP)

	Performance Co-Pilot (PCP) is a framework and services to
	support system-level performance monitoring and performance
	management.  Not installed by default.

		pcp-2.3.2-4.i386.rpm

*SL_enable_serialconsole

*	Renamed from serialconsole so as to use the new naming convention.

	This script makes all the changes necessary to send
	console output to both the serial port and the screen.  This
	also creates a login prompt on the serial port and allows users 
 	to login at this prompt. 
	
	Bug with the default serial number and dealing with a /boot
	partition were fixed in version 3.1.
  
* 		SL_enable_serialconsole-3.1-3.noarch.rpm

*Yum  -- From Duke University 

* 	yum-2.0.7-1.SL.noarch.rpm
*
*		yum 2.0.7 contains minor bug fixes along with the feature
*		of yum [action] package.somearch support added for
*		erase/remove, install, update and upgrade

*   	yum-conf-302-2.SL.noarch.rpm
*	
*		Changed to reflect 302
*		Changed main server to ftp.scientificlinux.org
*		Added a commented out 302contib section in yum.conf

*	Made it easier for users to change where their repository is.
*	For yum.cron you now only have to change the files
*	/etc/yum.d/yum.cron.primary and/or yum.cron.secondary
*	You can add multiple repository in either file, or leave either blank.
*	The servers in primary will be used in the order they are in the
*	file.  The servers in secondary will be used randomly.  So if you
*	are concerned about overloading your one server, leave the primary
*	blank, and list all your servers in secondary, where they will
*	be used randomly
 	
	now uses new feature "tolerant=1" for yum.cron

*	yumi-2.0.7-2.noarch.rpm
*
*	GUI written for YUM

*openafs
*
*	Updated to 1.2.11
*
*	kernel-module-openafs-2.4.21-15.0.2.EL-1.2.11-15.5.SL.athlon.rpm
*	kernel-module-openafs-2.4.21-15.0.2.ELsmp-1.2.11-15.5.SL.athlon.rpm
*	kernel-module-openafs-2.4.21-15.0.2.EL-1.2.11-15.5.SL.i686.rpm
*	kernel-module-openafs-2.4.21-15.0.2.ELsmp-1.2.11-15.5.SL.i686.rpm
*	openafs-1.2.11-15.5.SL.i386.rpm
*	openafs-client-1.2.11-15.5.SL.i386.rpm
*	openafs-compat-1.2.11-15.5.SL.i386.rpm
*	openafs-devel-1.2.11-15.5.SL.i386.rpm
*	openafs-kernel-source-1.2.11-15.5.SL.i386.rpm
*	openafs-kpasswd-1.2.11-15.5.SL.i386.rpm
*	openafs-krb5-1.2.11-15.5.SL.i386.rpm
*	openafs-server-1.2.11-15.5.SL.i386.rpm
*
*	openafs-firstboot-1.2.11-5.SL.noarch.rpm
*
*	The openafs-firstboot rpm enables "firstboot" to ask about
*	what AFS cell you want and if you want afs started at boot. 
*
*	Note the name change for the kernel module.  This change was
*	done to follow the fedora kernel-module naming convention
	
 	These are not installed by default.  
 	Now these can be selected in the installer. 
 
*SL_desktop_tweeks-1.1-1.i386.rpm was zz_desktop_tweeks-1.1-1.i386.rpm
 
        This adds a terminal and mozilla icon to the kicker panel for
 	both KDE and GNOME.  Installed by default for both KDE and GNOME.
 
*SL_inittab_change-1.0-4.i386.rpm was zz_inittab_change-1.0-4.i386.rpm

        Changes /etc/inittab to require the root password for
        single user mode.  Not installed by default.

*SL_libg2c.a_change-3.2.3-1.i386.rpm was zz_libg2c.a_change-3.2.3-1.i386.rpm
 
        Creates a missing symbolic link in the gcc-g77 package from
        /usr/lib/libg2c.a
        to /usr/lib/gcc-lib/i386-redhat-linux/3.2.3/libg2c.a
 	Installed with gcc-g77.
 
*SL_no_colorls-1.0-1.noarch.rpm was zz_no_colorls-1.0-1.noarch.rpm
 
       Turns off "color" of ls.  Not installed by default.

*SL_sendmail_accept-1.0-2.i386.rpm was zz_sendmail_accept-1.0-2.i386.rpm
 
        Changes Sendmail config so that it allows incomming mail.
 	Not installed by default.

Moved the following rpms over from /notsupported/RPMS as they really
should be in the release.  Note that /notsupported/RPMS are available
via yum or apt.

 	mysql-server-3.23.58-1.i386.rpm
 	tcllib-1.3-92.i386.rpm
 	tk-devel-8.3.5-92.i386.rpm
 	unixODBC-devel-2.2.3-6.i386.rpm

Documentation 

	Documentation in /sites/example/build/documentation on how to 
	make new "sites" including scripts to create site iso images.
 
*	These were updated to Update 2 versions
* 
*	rhel-ig-x8664-multi-en-3-3.noarch.rpm
*       rhel-isa-en-3-3.noarch.rpm
*       rhel-rg-en-3-3.noarch.rpm
*       rhel-sag-en-3-3.noarch.rpm
*       rhel-sg-en-3-3.noarch.rpm
*       rhel-devtools-en-3-3.noarch.rpm
*	rh-cs-en-3-3.noarch.rpm

*apt-get
 
 	Scientific Linux is aptable.  Both Yum and apt are installed by 
	default.  With yum handling the "auto update" function.  

*	apt-0.5.15cnc6-4.SL.i386.rpm
*	apt-devel-0.5.15cnc6-4.SL.i386.rpm
*	apt-sourceslist-302-4.SL.i386.rpm 
*	apt-firstboot-1-4.SL.noarch.rpm
*	apt-scripts-1-4.SL.noarch.rpm
*	apt-autoupdate-1-4.SL.noarch.rpm
*	synaptic-0.51-1.i386.rpm
	  
*	   apt-autoupdate provides "auto update" functionality that
*  	   can be enabled via chkconfig or the "firstboot" questions.
*
*	   apt-scripts privides useful lua scripts.
*
*	   Updated synaptic gives the ability to "hold" rpms.  It also
*	   fixes many bugs.
*	   apt-sourceslist points to ftp.scientificlinux.org
	   Please change to your local mirror.

---------------------------------------------------------------------------
UPDATED compared to 3 
----------------------------------------------------------------------------
*KERNEL
 
*    Latest errata kernel .  

*     	  kernel-2.4.21-15.0.2.EL.athlon.rpm
*         kernel-2.4.21-15.0.2.EL.i686.rpm
*         kernel-BOOT-2.4.21-15.0.2.EL.i386.rpm
*         kernel-doc-2.4.21-15.0.2.EL.i386.rpm
*         kernel-hugemem-2.4.21-15.0.2.EL.i686.rpm
*         kernel-hugemem-unsupported-2.4.21-15.0.2.EL.i686.rpm
*         kernel-smp-2.4.21-15.0.2.EL.athlon.rpm
*         kernel-smp-2.4.21-15.0.2.EL.i686.rpm
*         kernel-smp-unsupported-2.4.21-15.0.2.EL.athlon.rpm
*         kernel-smp-unsupported-2.4.21-15.0.2.EL.i686.rpm
*         kernel-source-2.4.21-15.0.2.EL.i386.rpm
*         kernel-unsupported-2.4.21-15.0.2.EL.athlon.rpm
*         kernel-unsupported-2.4.21-15.0.2.EL.i686.rpm

    Note the "unsupported" kernel rpms.  These contain modules that 
    are not in the "default kernel rpms".

RedHat EULA required changes

	anaconda-images
	redhat-artwork
 	redhat-logos
	anaconda-help
	indexhtml

	RedHat requires that the following rpms be changed as part of
        their EULA (End User License Agreement)

dhcp
	
	Fixes a problem with the drift file for ntp not being in the right
	place.

	dhcp-3.0pl2-6.16.i386.rpm		From Fedora core 1
*	dhclient-3.0pl2-6.16.i386.rpm		From Fedora core 1

mozilla
	Mozilla's default bookmarks all pointed to RedHat's web area's.
 	The default bookmarks were changed.
 
 	mozilla-1.4.2-3.0.2.sl1.i386.rpm
 	mozilla-chat-1.4.2-3.0.2.sl1.i386.rpm
 	mozilla-dom-inspector-1.4.2-3.0.2.sl1.i386.rpm
 	mozilla-js-debugger-1.4.2-3.0.2.sl1.i386.rpm
 	mozilla-mail-1.4.2-3.0.2.sl1.i386.rpm
 	mozilla-nspr-1.4.2-3.0.2.sl1.i386.rpm
 	mozilla-nss-1.4.2-3.0.2.sl1.i386.rpm

nedit

	Nedit was found to have a bug preventing it from opening files.
	Rebuilding from source did not clear up the problem.  It also
	showed a comment that STRONGLY suggested just getting the binaries
	from nedit.org.  We followed this advice, and we packaged the 
	binaries from nedit.org, into an rpm

	nedit-5.4-1.i386.rpm

Fixes to misc RPMS
	
	Added "Requires" of coreutils so that it will install during the install
	
		gstreamer-0.6.0-5f1.i386.rpm
       		gstreamer-tools-0.6.0-5f1.i386.rpm
	
 	Added "Requires" of tetex-afm so that it will be able to print after
 	install.  It was missing fonts provided in tetex-afm.
 	
 		a2ps-4.13b-28_SL.i386.rpm

----------------------------------------------------------------------------
Installer modifications
---------------------------------------------------------------------------

     Included "generic" installer graphics 

	RedHat requires us as part of their "EULA" that we replace
	the images in "anaconda-images" with our own.

 	anaconda-images

     Anaconda (installer)
  	
*	anaconda-9.1.2-2.7.SL.i386.rpm
*  	anaconda-runtime-9.1.2-2.7.SL.i386.rpm
*
*	   Fixes to support rpms that installer needs to be split between
*	   /SL/RPMS/ and sites/<site>/Updates/

 	anaconda-help-9.1-3.SL.noarch.rpm

	   Fixed a bug that RedHat introduced in loader2/method.c which broke
	   specifying the install method on the command line.
	
	   Added code to support "site" customizations which include

		Custom installer kernel(needs nptl)
		Custom installer(anaconda) including graphics
		Added RPMS
	        ability to select packages to install by default via "comps.xml"
		Modified/replaced RPMS (ability to upgrade or downgrade version)

		see /sites

	  Made a "Packages added to SL" group so that you could select
  	  any of these added RPMS during the install

---------------------------------------------------------------------------
Site Info
---------------------------------------------------------------------------
/sites/example/
 README	  Now just says to read docs in /sites/example/documentation
 build/documentation/  
   README	  Describes files and directories in /sites/example/
   README.steps   Step by step of what is needed to make a new site 
   README.images  Info on how to change the graphics used during the install

* /sites/example/build/scripts/
*    transform.sh		Script that does all the steps of
				README.steps except the original copying
			 	of the example tree over to the new site

*    make.site.from.release.sh  Script that will take a Enterprise 3 tree
				and make a site out of it.  Tested with
				cel3(CERN) and Fermi Linux .  Called by
				make.new.site.sh

*    make.new.site.sh  		Script that will take either a Enterprise 3 tree
				or the example site and make a site out of it.

---------------------------------------------------------------------------
/contrib/ 
---------------------------------------------------------------------------
The packges in this section have been contributed by various people.  They
are presented AS IS and there is no guarantee of them working.  These packages
are NOT supported by us.  They will only get security updates if the
contributor provides them.  If you have questions about them then ask the
contributor.

There are some rules to follow to be able to contribute to this area.   These 
rules might adjust some.

1- Contract Troy Dawson <dawson@fnal.gov> with the rpm's that you wish to
contribute.  If Troy doesn't personally know you, be prepared with some some
way to show him that you can be trusted.  He is a nice guy but
he also is very concerned that this contrib section doesn't get abused.

2- The contributed rpm's must be able to go into a standard Scientific
Linux 3.0.1 release without any extra outside rpms.  If extra rpm's are
required, they must be supplied.  All extra rpm's supplied must meet the
same criteria as the main rpm's.

3- For each rpm, the source rpm (src.rpm)  must be provided.

4- For each source rpm, you must provide where you got it.

5- Both rpm's and srpm's must be digitally signed.

6- Rpms must be freely distributable.  

We understand this sounds like alot of work, but once you do it once, it
becomes much easier.

RPMS/

*	SGI xfs filesystem utilities and kernels provided by CERN
*
*	acl-2.2.23-1.i386.rpm
*	attr-2.4.15-1.i386.rpm
*	dmapi-2.1.0-1.i386.rpm
*	dmapi-devel-2.1.0-1.i386.rpm
*	libacl-2.2.23-1.i386.rpm
*	libacl-devel-2.2.23-1.i386.rpm
*	libattr-2.4.15-1.i386.rpm
*	libattr-devel-2.4.15-1.i386.rpm
*	xfsdump-2.2.19-1.i386.rpm
*	xfsprogs-2.6.10-1.i386.rpm
*	xfsprogs-devel-2.6.10-1.i386.rpm
*
*	kernel-2.4.21-15.0.2.EL.SL.athlon.rpm
*	kernel-2.4.21-15.0.2.EL.SL.i686.rpm
*	kernel-BOOT-2.4.21-15.0.2.EL.SL.i386.rpm
*	kernel-doc-2.4.21-15.0.2.EL.SL.i386.rpm
*	kernel-hugemem-2.4.21-15.0.2.EL.SL.i686.rpm
*	kernel-hugemem-unsupported-2.4.21-15.0.2.EL.SL.i686.rpm
*	kernel-module-xfs-2.4.21-15.0.2.EL.SL-0.20040230-2.cern.athlon.rpm
*	kernel-module-xfs-2.4.21-15.0.2.EL.SL-0.20040230-2.cern.i686.rpm
*	kernel-module-xfs-2.4.21-15.0.2.EL.SLsmp-0.20040230-2.cern.athlon.rpm
*	kernel-module-xfs-2.4.21-15.0.2.EL.SLsmp-0.20040230-2.cern.i686.rpm
*	kernel-smp-2.4.21-15.0.2.EL.SL.athlon.rpm
*	kernel-smp-2.4.21-15.0.2.EL.SL.i686.rpm
*	kernel-smp-unsupported-2.4.21-15.0.2.EL.SL.athlon.rpm
*	kernel-smp-unsupported-2.4.21-15.0.2.EL.SL.i686.rpm
*	kernel-source-2.4.21-15.0.2.EL.SL.i386.rpm
*	kernel-unsupported-2.4.21-15.0.2.EL.SL.athlon.rpm
*	kernel-unsupported-2.4.21-15.0.2.EL.SL.i686.rpm

*/documentation/
*
*	README.xfs
*	README.yum
*	READNE.openssh.gss
---------------------------------------------------------------------------
/notsupported/RPMS/ 
---------------------------------------------------------------------------

The vendor decided that they could not support all of the rpms that may be 
included in a SRPM.  So I have included those here.  They are NOT supported by 
the vendor and thus are NOT supported by us.  They are included here for
completeness.  These are installable via yum or apt.

---------------------------------------------------------------------------
/../SRPMS/ 
---------------------------------------------------------------------------
/
	Contains the SRPMS for what we added or changed.
/vendor/
  /errata
	SRPMS from vendor for errata.
  /original
	SRPMS from vendor for originally released Enterpise 3 .
/sites/<sites>/SRPMS
	SRPMS for site
---------------------------------------------------------------------------
MISC NOTES
---------------------------------------------------------------------------
Upgrades from prior versions.
 
	UPDATES are NOT supported for all versions of SL . This is NOT
        something that we changed.  Future releases may support upgrading
	from SL 3.0.1 to future version of SL 3.0.x. 

  	UPDATES will NOT work from anything except RedHat AS 2.1. 

---------------------------------------------------------------------------
HARDWARE SPECIFIC ISSUES
---------------------------------------------------------------------------
Cisco Aironet 350 wireless ethernet card

  If you install Windows patch xxx in addition to upgrading the windows 
  driver it also upgrades the firmware in the Cisco 350 wireless card.
  Info from Cisco follows.  The "good" firmware is 4.25.30 or 1.6.7 or 1.5 .
  If it is 5.20.17 then it is the BAD firmware.  I got these firmware 
  versions from the Cisco website.

    "Recommended repair is a firmware down-grade of the Cisco Aironet 350
     PCMCIA network interface card as Cisco has not released a updated Linux
     for the upgraded firmware as of yet."
 
Xircom ethernet

   Will panic the kernel.

3com 905 ethernet (Not the A or B or C version)

	Seems like orginal 905 does not work but 905a does.
	Make sure Plug-n-Play if OFF in your bios.  This has
	made some 905's work.
	Also seems like there is a kernel bug tickled by kudzu. So
	to get this card to work you will need to turn kudzu off.
	chkconfig --level 35 kudzu off

---------------------------------------------------------------------------
SOFTWARE ISSUES/BUGS
---------------------------------------------------------------------------

XFree86 and ATI

  After the successful install (again using the graphical X-windows
  install) and after what appears
  to be a successful boot up, I get a blank screen and just sits there.

  Both the Radeon and Nvidia driver in this XFree86 4.3.0 release does 
  not detect that you are using the digital port of flat panel monitors.

  The easy thing to do is plug into the analog port until you can get
  past the install.

sgi_fam with tcpwrappers(/etc/hosts.deny) 

  Error messages /var/log/secure such as

	Jan 22 12:33:33 systemname xinetd[25122]: FAIL: sgi_fam libwrap
	from=<no address>
	Jan 22 12:33:33 systemname xinetd[3819]: START: sgi_fam pid=25123
	from=<no address>Jan 22 12:33:33 systemname xinetd[25123]: FAIL:
	sgi_fam libwrap from=<no address>

  Only solution so far is to change /etc/hosts.allow to allow sgi_fam
  with 

	fam: ALL

  This could be a security risk so you must decide. 

redhat-config-packages

  This rpm only installs packages via cdrom.  It is not useful. 
  It does NOT work so do NOT try to use it.  Use yum instead.  
  It is useful.  It is only included here because rpms have dependencies 
  on it and I do not want to change those to remove the dependencies.

/usr/X11R6/lib

 The "final link" to each of the libraries is missing.

   Should be

        libX11.so.6.2 <- libX11.so.6 <- libX11.so

   But is

        libX11.so.6.2 <- libX11.so.6

   Solution is to install Xfree86-devel.  This rpm will make the
   missing links.

---------------------------------------------------------------------------
INFO
---------------------------------------------------------------------------
Web Site

  http://www-oss.fnal.gov/projects/fermilinux/sl/
  https://plone.fnal.gov/Plone/Scientific%20Linux/

FTP

*  ftp://ftp.scientificlinux.org/linux/scientific/302/

Mailing Lists

  scientific-linux-devel@fnal.gov     Development of Scientific Linux
  scientific-linux-users@fnal.gov     Users of Scientific Linux supporting
				      each other
  scientific-linux-announce@fnal.gov  Announcements concerning Scientific Linux 
_____________________________________________________________________________
HARDWARE REQUIREMENTS
_____________________________________________________________________________

   The following information represents the minimum hardware requirements
   necessary to successfully install Scientific Linux :

   - Minimum: Pentium-pro class,  but in reality at least a Pentium II

   - Recommended for text-mode: 

		- Minimum of 400 MHz Pentium-II 
   		- Minimum of 128MB Memory

   - Recommended for graphical: 

		- Minimum of 400 MHz Pentium II 
   		- Minimum of 128MB 
 		- Recommended: 192MB

   Hard Disk Space (NOTE: Additional space will be required for user data):

   - Common "Generic Desktop" Installation : 1.5GB

---------------------------------------------------------------------------
ERRATA included - rebuilt from SRPMS

/errata/SL/RPMS/
---------------------------------------------------------------------------

Updated (contains all of Update 1 and Update 2(except for rdist))
compared to original 3 released on October 26, 2003.

*       kernel-2.4.21-15.0.2.EL.athlon.rpm
*       kernel-2.4.21-15.0.2.EL.i686.rpm
*       kernel-BOOT-2.4.21-15.0.2.EL.i386.rpm
*       kernel-doc-2.4.21-15.0.2.EL.i386.rpm
*       kernel-hugemem-2.4.21-15.0.2.EL.i686.rpm
*       kernel-hugemem-unsupported-2.4.21-15.0.2.EL.i686.rpm
*       kernel-smp-2.4.21-15.0.2.EL.athlon.rpm
*       kernel-smp-2.4.21-15.0.2.EL.i686.rpm
*       kernel-smp-unsupported-2.4.21-15.0.2.EL.athlon.rpm
*       kernel-smp-unsupported-2.4.21-15.0.2.EL.i686.rpm
*       kernel-source-2.4.21-15.0.2.EL.i386.rpm
*       kernel-unsupported-2.4.21-15.0.2.EL.athlon.rpm
*       kernel-unsupported-2.4.21-15.0.2.EL.i686.rpm
*       libpng10-1.0.13-14.i386.rpm
*       libpng-1.2.2-24.i386.rpm
*       libpng-devel-1.2.2-24.i386.rpm
*       squirrelmail-1.4.3-0.e3.1.noarch.rpm
*       cvs-1.11.2-24.i386.rpm
*       ethereal-0.10.3-0.30E.2.i386.rpm
*       ethereal-gnome-0.10.3-0.30E.2.i386.rpm
*       krb5-devel-1.2.7-24.i386.rpm
*       krb5-libs-1.2.7-24.i386.rpm
*       krb5-server-1.2.7-24.i386.rpm
*       krb5-workstation-1.2.7-24.i386.rpm
*       squid-2.5.STABLE3-6.3E.i386.rpm
*       rhel-ig-x8664-multi-en-3-3.noarch.rpm
*       rhel-isa-en-3-3.noarch.rpm
*       rhel-rg-en-3-3.noarch.rpm
*       rhel-sag-en-3-4.noarch.rpm
*       rhel-sg-en-3-3.noarch.rpm
*       elfutils-0.94-1.i386.rpm
*       elfutils-devel-0.94-1.i386.rpm
*	elfutils-libelf-0.94-1.i386.rpm
*	elfutils-libelf-devel-0.94-1.i386.rpm
*	gdb-6.0post-0.20040223.20.i386.rpm
*	gnome-panel-2.2.2.1-7.i386.rpm
*	kernel-utils-2.4-8.37.5.i386.rpm
*	lha-1.14i-10.2.i386.rpm
*	libpcap-0.7.2-7.E3.2.i386.rpm
*	rsync-2.5.7-4.3E.i386.rpm
*	sendmail-8.12.11-3.3.i386.rpm
*	sendmail-cf-8.12.11-3.3.i386.rpm
*	tcpdump-3.7.2-7.E3.2.i386.rpm
*	up2date-4.2.16-1.i386.rpm
*	up2date-gnome-4.2.16-1.i386.rpm
*	utempter-0.5.5-1.3EL.0.i386.rpm
*	kdelibs-3.1.3-6.4.i386.rpm
*	kdelibs-devel-3.1.3-6.4.i386.rpm
*	arptables_jf-0.0.7-0.3E.i386.rpm
*	at-3.1.8-47.ent.i386.rpm
*	binutils-2.14.90.0.4-35.i386.rpm
*	cpp-3.2.3-34.i386.rpm
*	cyrus-sasl-2.1.15-8.i386.rpm
*	cyrus-sasl-devel-2.1.15-8.i386.rpm
*	cyrus-sasl-gssapi-2.1.15-8.i386.rpm
*	cyrus-sasl-md5-2.1.15-8.i386.rpm
*	cyrus-sasl-plain-2.1.15-8.i386.rpm
*	distcache-0.4.2-9.3.i386.rpm
*	distcache-devel-0.4.2-9.3.i386.rpm
*	doxygen-1.3.5-0.RHEL3.1.i386.rpm
*	fontconfig-2.2.1-8.0.i386.rpm
*	fontconfig-devel-2.2.1-8.0.i386.rpm
*	gcc-3.2.3-34.i386.rpm
*	gcc-c++-3.2.3-34.i386.rpm
*	gcc-c++-ssa-3.5ssa-0.20030801.47.i386.rpm
*	gcc-g77-3.2.3-34.i386.rpm
*	gcc-g77-ssa-3.5ssa-0.20030801.47.i386.rpm
*	gcc-gnat-3.2.3-34.i386.rpm
*	gcc-java-3.2.3-34.i386.rpm
*	gcc-java-ssa-3.5ssa-0.20030801.47.i386.rpm
*	gcc-objc-3.2.3-34.i386.rpm
*	gcc-objc-ssa-3.5ssa-0.20030801.47.i386.rpm
*	gcc-ssa-3.5ssa-0.20030801.47.i386.rpm
*	GConf2-2.2.1-4.i386.rpm
*	GConf2-devel-2.2.1-4.i386.rpm
*	gdm-2.4.1.6-5.i386.rpm
*	glibc-2.3.2-95.20.i386.rpm
*	glibc-2.3.2-95.20.i686.rpm
*	glibc-common-2.3.2-95.20.i386.rpm
*	glibc-devel-2.3.2-95.20.i386.rpm
*	glibc-headers-2.3.2-95.20.i386.rpm
*	glibc-profile-2.3.2-95.20.i386.rpm
*	glibc-utils-2.3.2-95.20.i386.rpm
*	gnome-mime-data-2.2.0-3.i386.rpm
*	hwdata-0.101.8-1.noarch.rpm
*	imap-2002d-8.i386.rpm
*	initscripts-7.31.13.EL-1.i386.rpm
*	ipsec-tools-0.2.5-0.4.i386.rpm
*	iptables-1.2.8-12.3.i386.rpm
*	iptables-ipv6-1.2.8-12.3.i386.rpm
*	kbd-1.08-10.2.i386.rpm
*	kudzu-1.1.22.2-1.i386.rpm
*	kudzu-devel-1.1.22.2-1.i386.rpm
*	libf2c-3.2.3-34.i386.rpm
*	libgcc-3.2.3-34.i386.rpm
*	libgcc-ssa-3.5ssa-0.20030801.47.i386.rpm
*	libgcj-3.2.3-34.i386.rpm
*	libgcj-devel-3.2.3-34.i386.rpm
*	libgcj-ssa-3.5ssa-0.20030801.47.i386.rpm
*	libgcj-ssa-devel-3.5ssa-0.20030801.47.i386.rpm
*	libgnat-3.2.3-34.i386.rpm
*	libmudflap-3.5ssa-0.20030801.47.i386.rpm
*	libmudflap-devel-3.5ssa-0.20030801.47.i386.rpm
*	libobjc-3.2.3-34.i386.rpm
*	libstdc++-3.2.3-34.i386.rpm
*	libstdc++-devel-3.2.3-34.i386.rpm
*	libstdc++-ssa-3.5ssa-0.20030801.47.i386.rpm
*	libstdc++-ssa-devel-3.5ssa-0.20030801.47.i386.rpm
*	mdadm-1.5.0-3.i386.rpm
*	modutils-2.4.25-12.EL.i386.rpm
*	modutils-devel-2.4.25-12.EL.i386.rpm
*	net-snmp-5.0.9-2.30E.3.i386.rpm
*	net-snmp-devel-5.0.9-2.30E.3.i386.rpm
*	net-snmp-utils-5.0.9-2.30E.3.i386.rpm
*	nptl-devel-2.3.2-95.20.i686.rpm
*	nscd-2.3.2-95.20.i386.rpm
*	nss_ldap-207-10.i386.rpm
*	ntp-4.1.2-4.EL3.1.i386.rpm
*	openssh-3.6.1p2-33.30.1.i386.rpm
*	openssh-askpass-3.6.1p2-33.30.1.i386.rpm
*	openssh-askpass-gnome-3.6.1p2-33.30.1.i386.rpm
*	openssh-clients-3.6.1p2-33.30.1.i386.rpm
*	openssh-server-3.6.1p2-33.30.1.i386.rpm
*	oprofile-0.5.4-22.i386.rpm
*	oprofile-devel-0.5.4-22.i386.rpm
*	pam-0.75-54.i386.rpm
*	pam-devel-0.75-54.i386.rpm
*	pam_krb5-1.73-1.i386.rpm
*	php-4.3.2-11.ent.i386.rpm
*	php-imap-4.3.2-11.ent.i386.rpm
*	php-ldap-4.3.2-11.ent.i386.rpm
*	php-mysql-4.3.2-11.ent.i386.rpm
*	php-odbc-4.3.2-11.ent.i386.rpm
*	php-pgsql-4.3.2-11.ent.i386.rpm
*	popt-1.8.2-0.14.i386.rpm
*	postfix-2.0.16-13.RHEL3.i386.rpm
*	redhat-config-kickstart-2.3.22-3.noarch.rpm
*	redhat-config-packages-1.2.9.2-1.noarch.rpm
*	redhat-config-printer-0.6.47.3.19-1.i386.rpm
*	redhat-config-printer-gui-0.6.47.3.19-1.i386.rpm
*	redhat-config-proc-0.23-0.EL3.1.i386.rpm
*	redhat-rpm-config-8.0.28-2.noarch.rpm
*	rhpl-0.110.4-1.i386.rpm
*	rh-postgresql-7.3.6-1.i386.rpm
*	rh-postgresql-contrib-7.3.6-1.i386.rpm
*	rh-postgresql-devel-7.3.6-1.i386.rpm
*	rh-postgresql-docs-7.3.6-1.i386.rpm
*	rh-postgresql-jdbc-7.3.6-1.i386.rpm
*	rh-postgresql-libs-7.3.6-1.i386.rpm
*	rh-postgresql-pl-7.3.6-1.i386.rpm
*	rh-postgresql-python-7.3.6-1.i386.rpm
*	rh-postgresql-server-7.3.6-1.i386.rpm
*	rh-postgresql-tcl-7.3.6-1.i386.rpm
*	rh-postgresql-test-7.3.6-1.i386.rpm
*	rpm-4.2.2-0.14.i386.rpm
*	rpm-build-4.2.2-0.14.i386.rpm
*	rpm-devel-4.2.2-0.14.i386.rpm
*	rpm-python-4.2.2-0.14.i386.rpm
*	shadow-utils-4.0.3-20.i386.rpm
*	sysklogd-1.4.1-12.1.i386.rpm
*	SysVinit-2.85-4.2.i386.rpm
*	unixODBC-2.2.8-2.3.0.2.i386.rpm
*	unixODBC-devel-2.2.8-2.3.0.2.i386.rpm
*	unixODBC-kde-2.2.8-2.3.0.2.i386.rpm
*	up2date-4.2.14-1.i386.rpm
*	up2date-gnome-4.2.14-1.i386.rpm
*	vsftpd-1.2.1-3.i386.rpm
*	xemacs-21.4.13-8.ent.i386.rpm
*	xemacs-el-21.4.13-8.ent.i386.rpm
*	xemacs-info-21.4.13-8.ent.i386.rpm
*	XFree86-100dpi-fonts-4.3.0-62.EL.i386.rpm
*	XFree86-4.3.0-62.EL.i386.rpm
*	XFree86-75dpi-fonts-4.3.0-62.EL.i386.rpm
*	XFree86-base-fonts-4.3.0-62.EL.i386.rpm
*	XFree86-cyrillic-fonts-4.3.0-62.EL.i386.rpm
*	XFree86-devel-4.3.0-62.EL.i386.rpm
*	XFree86-doc-4.3.0-62.EL.i386.rpm
*	XFree86-font-utils-4.3.0-62.EL.i386.rpm
*	XFree86-ISO8859-14-100dpi-fonts-4.3.0-62.EL.i386.rpm
*	XFree86-ISO8859-14-75dpi-fonts-4.3.0-62.EL.i386.rpm
*	XFree86-ISO8859-15-100dpi-fonts-4.3.0-62.EL.i386.rpm
*	XFree86-ISO8859-15-75dpi-fonts-4.3.0-62.EL.i386.rpm
*	XFree86-ISO8859-2-100dpi-fonts-4.3.0-62.EL.i386.rpm
*	XFree86-ISO8859-2-75dpi-fonts-4.3.0-62.EL.i386.rpm
*	XFree86-ISO8859-9-100dpi-fonts-4.3.0-62.EL.i386.rpm
*	XFree86-ISO8859-9-75dpi-fonts-4.3.0-62.EL.i386.rpm
*	XFree86-libs-4.3.0-62.EL.i386.rpm
*	XFree86-libs-data-4.3.0-62.EL.i386.rpm
*	XFree86-Mesa-libGL-4.3.0-62.EL.i386.rpm
*	XFree86-Mesa-libGLU-4.3.0-62.EL.i386.rpm
*	XFree86-syriac-fonts-4.3.0-62.EL.i386.rpm
*	XFree86-tools-4.3.0-62.EL.i386.rpm
*	XFree86-truetype-fonts-4.3.0-62.EL.i386.rpm
*	XFree86-twm-4.3.0-62.EL.i386.rpm
*	XFree86-xauth-4.3.0-62.EL.i386.rpm
*	XFree86-xdm-4.3.0-62.EL.i386.rpm
*	XFree86-xfs-4.3.0-62.EL.i386.rpm
*	XFree86-Xnest-4.3.0-62.EL.i386.rpm
*	XFree86-Xvfb-4.3.0-62.EL.i386.rpm
*	ypserv-2.8-6.i386.rpm
*	dev-3.3.12-1.i386.rpm
*	MAKEDEV-3.3.12-1.i386.rpm
*	nfs-utils-1.0.6-21EL.i386.rpm
*	openoffice.org-1.1.0-16.7.EL.i386.rpm
*	openoffice.org-i18n-1.1.0-16.7.EL.i386.rpm
*	openoffice.org-libs-1.1.0-16.7.EL.i386.rpm
*	redhat-config-network-1.2.60-1.noarch.rpm
*	redhat-config-network-tui-1.2.60-1.noarch.rpm

As of May 10, 2004

 	openoffice.org-1.1.0-16.SL.i386.rpm
        openoffice.org-i18n-1.1.0-16.SL.i386.rpm
        openoffice.org-libs-1.1.0-16.SL.i386.rpm
 	kernel-2.4.21-9.0.3.EL.athlon.rpm
 	kernel-2.4.21-9.0.3.EL.i686.rpm
 	kernel-BOOT-2.4.21-9.0.3.EL.i386.rpm
 	kernel-doc-2.4.21-9.0.3.EL.i386.rpm
 	kernel-hugemem-2.4.21-9.0.3.EL.i686.rpm
 	kernel-hugemem-unsupported-2.4.21-9.0.3.EL.i686.rpm
 	kernel-smp-2.4.21-9.0.3.EL.athlon.rpm
 	kernel-smp-2.4.21-9.0.3.EL.i686.rpm
 	kernel-smp-unsupported-2.4.21-9.0.3.EL.athlon.rpm
 	kernel-smp-unsupported-2.4.21-9.0.3.EL.i686.rpm
 	kernel-source-2.4.21-9.0.3.EL.i386.rpm
 	kernel-unsupported-2.4.21-9.0.3.EL.athlon.rpm
 	kernel-unsupported-2.4.21-9.0.3.EL.i686.rpm
	cvs-1.11.2-18.i386.rpm
        squid-2.5.STABLE3-5.3E.i386.rpm
	ethereal-0.10.3-0.30E.1.i386.rpm
        ethereal-gnome-0.10.3-0.30E.1.i386.rpm
 	mozilla-1.4.2-3.0.2.sl1.i386.rpm
 	mozilla-chat-1.4.2-3.0.2.sl1.i386.rpm
 	mozilla-dom-inspector-1.4.2-3.0.2.sl1.i386.rpm
 	mozilla-js-debugger-1.4.2-3.0.2.sl1.i386.rpm
 	mozilla-mail-1.4.2-3.0.2.sl1.i386.rpm
 	mozilla-nspr-1.4.2-3.0.2.sl1.i386.rpm
 	mozilla-nss-1.4.2-3.0.2.sl1.i386.rpm
 	httpd-2.0.46-32.ent.i386.rpm
        httpd-devel-2.0.46-32.ent.i386.rpm
        mod_ssl-2.0.46-32.ent.i386.rpm
 	nfs-utils-1.0.6-7.EL.i386.rpm
        openssl096b-0.9.6b-16.i386.rpm
        openssl-0.9.7a-33.4.i386.rpm
        openssl-0.9.7a-33.4.i686.rpm
        openssl-devel-0.9.7a-33.4.i386.rpm
 	gdk-pixbuf-0.22.0-6.1.1.i386.rpm
        gdk-pixbuf-devel-0.22.0-6.1.1.i386.rpm
        gdk-pixbuf-gnome-0.22.0-6.1.1.i386.rpm
        sysstat-4.0.7-4.EL3.2.i386.rpm
        libxml2-2.5.10-6.i386.rpm
        libxml2-devel-2.5.10-6.i386.rpm
        libxml2-python-2.5.10-6.i386.rpm
        mod_python-3.0.3-3.ent.i386.rpm
        samba-3.0.2-6.3E.i386.rpm
        samba-client-3.0.2-6.3E.i386.rpm
        samba-common-3.0.2-6.3E.i386.rpm
        eclipse-2.1.1-4.i386.rpm
        pwlib-1.4.7-7.EL.i386.rpm
	gaim-0.75-3.2.0.i386.rpm
        slocate-2.7-3.i386.rpm
 	anaconda-9.1.1-7.RHEL.i386.rpm
 	anaconda-runtime-9.1.1-7.RHEL.i386.rpm
 	binutils-2.14.90.0.4-26.3.i386.rpm
 	elfutils-0.91-3.i386.rpm
 	elfutils-devel-0.91-3.i386.rpm
 	elfutils-libelf-0.91-3.i386.rpm
 	gdb-6.0post-0.20031117.6.i386.rpm
 	popt-1.8.1-4.4.i386.rpm
 	rpm-4.2.1-4.4.i386.rpm
 	rpm-build-4.2.1-4.4.i386.rpm
 	rpm-devel-4.2.1-4.4.i386.rpm
 	rpm-python-4.2.1-4.4.i386.rpm
 	up2date-4.2.5-1.i386.rpm
 	up2date-gnome-4.2.5-1.i386.rpm
        kdepim-3.1.3-3.3.i386.rpm
        kdepim-devel-3.1.3-3.3.i386.rpm
        libpcap-0.7.2-7.E3.1.i386.rpm
        tcpdump-3.7.2-7.E3.1.i386.rpm
	ant-1.5.2-23.i386.rpm
	ant-libs-1.5.2-23.i386.rpm
	compat-gcc-7.3-2.96.123.i386.rpm
	compat-gcc-c++-7.3-2.96.123.i386.rpm
	compat-libstdc++-7.3-2.96.123.i386.rpm
	compat-libstdc++-devel-7.3-2.96.123.i386.rpm
	cpp-3.2.3-24.i386.rpm
	devlabel-0.42.05-2.1.i386.rpm
	gcc-3.2.3-24.i386.rpm
	gcc-c++-3.2.3-24.i386.rpm
	gcc-g77-3.2.3-24.i386.rpm
	gcc-gnat-3.2.3-24.i386.rpm
	gcc-java-3.2.3-24.i386.rpm
	gcc-objc-3.2.3-24.i386.rpm
	hotplug-2002_04_01-20.2.i386.rpm
	hwdata-0.101.1-1.noarch.rpm
	initscripts-7.31.9.EL-1.i386.rpm
	kdegames-3.1.3-3.2.i386.rpm
	kinput2-canna-wnn6-v3.1-12.EL.i386.rpm
	kudzu-1.1.22-1.1.i386.rpm
	kudzu-devel-1.1.22-1.1.i386.rpm
	libf2c-3.2.3-24.i386.rpm
	libgcc-3.2.3-24.i386.rpm
	libgcj-3.2.3-24.i386.rpm
	libgcj-devel-3.2.3-24.i386.rpm
	libgnat-3.2.3-24.i386.rpm
	libobjc-3.2.3-24.i386.rpm
	libstdc++-3.2.3-24.i386.rpm
	libstdc++-devel-3.2.3-24.i386.rpm
	mdadm-1.4.0-1.i386.rpm
	modutils-2.4.25-11.EL.i386.rpm
	modutils-devel-2.4.25-11.EL.i386.rpm
	netdump-0.6.11-3.i386.rpm
	netdump-server-0.6.11-3.i386.rpm
	net-snmp-5.0.9-2.30E.1.i386.rpm
	net-snmp-devel-5.0.9-2.30E.1.i386.rpm
	net-snmp-utils-5.0.9-2.30E.1.i386.rpm
	nss_ldap-207-5.i386.rpm
	oprofile-0.5.4-13.i386.rpm
	oprofile-devel-0.5.4-13.i386.rpm
	pstack-1.2-3.EL.1.i386.rpm
	quagga-0.96.2-10.3E.i386.rpm
	redhat-config-kickstart-2.3.20-1.noarch.rpm
	redhat-config-network-1.2.59-1.noarch.rpm
	redhat-config-network-tui-1.2.59-1.noarch.rpm
	redhat-config-packages-1.2.9-1.noarch.rpm
	redhat-config-xfree86-0.7.7-1.noarch.rpm
	rh-postgresql-7.3.4-9.i386.rpm
	rh-postgresql-contrib-7.3.4-9.i386.rpm
	rh-postgresql-devel-7.3.4-9.i386.rpm
	rh-postgresql-docs-7.3.4-9.i386.rpm
	rh-postgresql-jdbc-7.3.4-9.i386.rpm
	rh-postgresql-libs-7.3.4-9.i386.rpm
	rh-postgresql-python-7.3.4-9.i386.rpm
	rh-postgresql-tcl-7.3.4-9.i386.rpm
	shadow-utils-4.0.3-15.i386.rpm
	strace-4.5.1-1.EL.1.i386.rpm
	XFree86-100dpi-fonts-4.3.0-44.EL.i386.rpm
	XFree86-4.3.0-44.EL.i386.rpm
	XFree86-75dpi-fonts-4.3.0-44.EL.i386.rpm
	XFree86-base-fonts-4.3.0-44.EL.i386.rpm
	XFree86-cyrillic-fonts-4.3.0-44.EL.i386.rpm
	XFree86-devel-4.3.0-44.EL.i386.rpm
	XFree86-doc-4.3.0-44.EL.i386.rpm
	XFree86-font-utils-4.3.0-44.EL.i386.rpm
	XFree86-ISO8859-14-100dpi-fonts-4.3.0-44.EL.i386.rpm
	XFree86-ISO8859-14-75dpi-fonts-4.3.0-44.EL.i386.rpm
	XFree86-ISO8859-15-100dpi-fonts-4.3.0-44.EL.i386.rpm
	XFree86-ISO8859-15-75dpi-fonts-4.3.0-44.EL.i386.rpm
	XFree86-ISO8859-2-100dpi-fonts-4.3.0-44.EL.i386.rpm
	XFree86-ISO8859-2-75dpi-fonts-4.3.0-44.EL.i386.rpm
	XFree86-ISO8859-9-100dpi-fonts-4.3.0-44.EL.i386.rpm
	XFree86-ISO8859-9-75dpi-fonts-4.3.0-44.EL.i386.rpm
	XFree86-libs-4.3.0-44.EL.i386.rpm
	XFree86-libs-data-4.3.0-44.EL.i386.rpm
	XFree86-Mesa-libGL-4.3.0-44.EL.i386.rpm
	XFree86-Mesa-libGLU-4.3.0-44.EL.i386.rpm
	XFree86-syriac-fonts-4.3.0-44.EL.i386.rpm
	XFree86-tools-4.3.0-44.EL.i386.rpm
	XFree86-truetype-fonts-4.3.0-44.EL.i386.rpm
	XFree86-twm-4.3.0-44.EL.i386.rpm
	XFree86-xauth-4.3.0-44.EL.i386.rpm
	XFree86-xdm-4.3.0-44.EL.i386.rpm
	XFree86-xfs-4.3.0-44.EL.i386.rpm
	XFree86-Xnest-4.3.0-44.EL.i386.rpm
	XFree86-Xvfb-4.3.0-44.EL.i386.rpm
	ypbind-1.12-5.i386.rpm
	lftp-2.6.3-5.i386.rpm
        gnupg-1.2.1-10.i386.rpm
 	freeradius-0.9.3-1.i386.rpm
	rsync-2.5.7-1.i386.rpm
        glibc-2.3.2-95.6.i386.rpm
        glibc-2.3.2-95.6.i686.rpm
        glibc-common-2.3.2-95.6.i386.rpm
        glibc-devel-2.3.2-95.6.i386.rpm
        glibc-headers-2.3.2-95.6.i386.rpm
        glibc-profile-2.3.2-95.6.i386.rpm
        glibc-utils-2.3.2-95.6.i386.rpm
        nptl-devel-2.3.2-95.6.i686.rpm
        nscd-2.3.2-95.6.i386.rpm
        iproute-2.4.7-11.30E.1.i386.rpm