--- title: "Normal Outcome (Known SD)" package: beastt output: rmarkdown::html_vignette: toc: true code_folding: show vignette: > %\VignetteIndexEntry{Normal Outcome (Known SD)} %\VignetteEncoding{UTF-8} %\VignetteEngine{knitr::rmarkdown} editor_options: chunk_output_type: console --- ```{r setup, include=FALSE} knitr::opts_chunk$set( collapse = TRUE, comment = "#>" ) library(beastt) ``` ## Introduction and Data Description In this example, we illustrate how to use Bayesian dynamic borrowing (BDB) with the inclusion of inverse probability weighting to balance baseline covariate distributions between external and internal datasets. This particular example considers a hypothetical trial with a cross sectional normal outcome and a known standard deviation (SD) in each treatment arm (external control arm and both internal arms), and our objective is to use BDB with IPWs to construct a posterior distribution for the control mean $\theta_C$. We will use simulated internal and external datasets from the package where each dataset has a normally distributed response variable and four baseline covariates which we will balance. The external control dataset has a sample size of 150 participants, and the distributions of the four covariates are as follows: - Covariate 1: normal with a mean and standard deviation of approximately 50 and 10, respectively - Covariate 2: binary (0 vs. 1) with approximately 20% of participants with level 1 - Covariate 3: binary (0 vs. 1) with approximately 60% of participants with level 1 - Covariate 4: binary (0 vs. 1) with approximately 30% of participants with level 1 The internal dataset has 120 participants with 60 participants in each of the control and active treatment arms. The covariate distributions of each arm are as follows: - Covariate 1: normal with a mean and standard deviation of approximately 55 and 8, respectively - Covariate 2: binary (0 vs. 1) with approximately 30% of participants with level 1 - Covariate 3: binary (0 vs. 1) with approximately 50% of participants with level 1 - Covariate 4: binary (0 vs. 1) with approximately 30% of participants with level 1 We assume the standard deviations of both the external and internal response data are known and equal to 0.15. ```{r class.source = 'fold-hide'} library(tibble) library(distributional) library(dplyr) library(ggplot2) set.seed(1234) summary(int_norm_df) summary(ex_norm_df) sd_external_control <- 0.15 sd_internal_control <- 0.15 sd_internal_treated <- 0.15 ``` ## Propensity Scores and Inverse Probability Weights With the covariate data from both the external and internal datasets, we can calculate the propensity scores and ATT inverse probability weights (IPWs) for the internal and external control participants using the `calc_prop_scr` function. This creates a propensity score object which we can use for calculating an inverse probability weighted power prior in the next step. **Note: when reading external and internal datasets into `calc_prop_scr`, be sure to include only the arms in which you want to balance the covariate distributions (typically the internal and external control arms).** In this example, we want to balance the covariate distributions of the external control arm to be similar to those of the internal control arm, so we will exclude the internal active treatment arm data from this function. ```{r} ps_model <- ~ cov1 + cov2 + cov3 + cov4 ps_obj <- calc_prop_scr(internal_df = filter(int_norm_df, trt == 0), external_df = ex_norm_df, id_col = subjid, model = ps_model) ps_obj ``` In order to check the suitability of the external data, we can create a variety of diagnostic plots. The first plot we might want is a histogram of the overlapping propensity score distributions from both datasets. To get this, we use the `prop_scr_hist` function. This function takes in the propensity score object made in the previous step, and we can optionally supply the variable we want to look at (either the propensity score or the IPW). By default, it will plot the propensity scores. Additionally, we can look at the densities rather than histograms by using the `prop_scr_dens` function. When looking at the IPWs with either the histogram or the density functions, it is important to note that only the IPWs for external control participants will be shown because the ATT IPWs for all internal control participants are equal to 1. ```{r} prop_scr_hist(ps_obj) prop_scr_dens(ps_obj, variable = "ipw") ``` The final plot we might want to look at is a love plot to visualize the absolute standardized mean differences (both unadjusted and adjusted by the IPWs) of the covariates between the internal and external data. To do this, we use the `prop_scr_love` function. Like the previous function, the only required parameter for this function is the propensity score object, but we can also provide a location along the x-axis for a vertical reference line. ```{r} prop_scr_love(ps_obj, reference_line = 0.1) ``` ## Inverse Probability Weighted Power Prior Now that we have created and assessed our propensity score object, we can read it into the `calc_power_prior_norm` function to calculate a normal inverse probability weighted power prior for $\theta_C$. To calculate the power prior, we need to supply the following information: - weighted object (the propensity score object we created above) - response variable name (in this case $y$) - initial prior, in the form of a normal distributional object (e.g., $\mbox{N}(0.5, \mbox{sd} = 10)$) - SD of the external control response data, assumed known The prior and the external control SD are optional. If no prior is provided, an improper uniform prior will be used for the initial prior; i.e., $\pi(\theta_C) \propto 1$. If no external control SD or initial prior are specified (i.e., both the `prior` and `external_sd` arguments are set as `NULL`), then a non-standardized $t$ power prior will be created (not covered in this vignette). In this example, we define the initial prior to be a vague normal distribution with a mean 0.5 and SD 10. Once we have a power prior, we might want to plot it. To do that, we use the `plot_dist` function. ```{r} pwr_prior <- calc_power_prior_norm(ps_obj, response = y, prior = dist_normal(0.5, 10), external_sd = sd_external_control) plot_dist(pwr_prior) ``` ## Inverse Probability Weighted Robust Mixture Prior We can robustify the normal power prior for $\theta_C$ by adding a vague component to create a robust mixture prior (RMP). We define the vague component to be a normal distribution with the same mean as the power prior and a variance that is $n_{ex}$ times greater than the variance of the power prior, where $n_{ex}$ denotes the sample size of the external control arm. To construct the RMP with two components, we use the `robustify_norm` function and place 0.5 weight on each component. The two components of the resulting RMP are labeled as "informative" and "vague". As an alternative to using `robustify_norm`, we can instead use the `dist_mixture` function to create a mixture prior with an arbitrary number of normal and/or $t$ components. If any component of the prior is a $t$ distribution, the component will be approximated with the mixture of two normal distributions. ```{r} n_external <- nrow(ex_norm_df) mix_prior <- robustify_norm(pwr_prior, n_external, weights = c(0.5, 0.5)) plot_dist("Power Prior" = pwr_prior, "Vague Prior" = dist_normal(mean = mix_means(mix_prior)["vague"], sd = mix_sigmas(mix_prior)["vague"]), "Robust Mixture Prior" = mix_prior) ``` ## Posterior Distributions To create a posterior distribution for $\theta_C$, we can pass the resulting RMP to the `calc_post_norm` function. By assuming the SD of the internal response data to be known, the resulting posterior distribution is also a mixture of normal components (the case when the SD is unknown is not covered in this vignette). **Note: when reading internal data directly into `calc_post_norm`, be sure to include only the arm of interest (e.g., the internal control arm if creating a posterior distribution for $\theta_C$).** ```{r} post_control <- calc_post_norm(filter(int_norm_df, trt == 0), response = y, prior = mix_prior, internal_sd = sd_internal_control) plot_dist(post_control) ``` Next, we create a posterior distribution for the mean of the active treatment arm $\theta_T$ by reading the internal data for the corresponding arm into the `calc_post_norm` function while assuming the SD of the internal active treatment arm to be equal to 0.15. In this case, we use the vague component of the RMP as our normal prior. **As noted earlier, be sure to read in only the data for the internal active treatment arm while excluding the internal control data.** ```{r} post_treated <- calc_post_norm(internal_data = filter(int_norm_df, trt == 1), response = y, prior = dist_normal(mean = mix_means(mix_prior)["vague"], sd = mix_sigmas(mix_prior)["vague"]), internal_sd = sd_internal_treated) plot_dist("Control Posterior" = post_control, "Treatment Posterior" = post_treated) ``` ## Posterior Summary Statistics and Samples With our posterior distributions for $\theta_C$ and $\theta_T$ saved as distributional objects, we can use several functions from the `distributional` package to calculate posterior summary statistics and sample from the distributions. Using the posterior distribution for $\theta_C$ as an example, we illustrate several of these functions below. - Posterior summary statistics: ```{r} c(mean = mean(post_control), median = median(post_control), variance = variance(post_control)) ``` - Highest density regions using the `hdr` function: ```{r} hdr(post_control) # 95% HDR hdr(post_control, 90) # 90% HDR ``` - Credible intervals using either the `hilo` function or the `quantile` function: ```{r} hilo(post_control) # 95% credible interval hilo(post_control, 90) # 90% credible interval quantile(post_control, c(.025, .975))[[1]] # 95% CrI via quantile function ``` - Posterior probabilities (e.g., $Pr(\theta_C < 0.7 | D)$) using the `cdf` function: ```{r} cdf(post_control, q = .7) # Pr(theta_C < 0.7 | D) ``` - Posterior (log) densities at a given value: ```{r} density(post_control, at = .7) # density at 0.7 density(post_control, at = .7, log = TRUE) # log density at 0.7 ``` In addition to calculating posterior summary statistics, we can sample from posterior distributions using the `generate` function. Here, we randomly sample 100,000 draws from the posterior distribution for $\theta_C$ and plot a histogram of the sample. ```{r} samp_control <- generate(x = post_control, times = 100000)[[1]] ggplot(data.frame(samp = samp_control), aes(x = samp)) + labs(y = "Density", x = expression(theta[C])) + ggtitle(expression(paste("Posterior Samples of ", theta[C]))) + geom_histogram(aes(y = after_stat(density)), color = "#5398BE", fill = "#5398BE", position = "identity", binwidth = .01, alpha = 0.5) + geom_density(color = "black") + theme_bw() ``` Similarly, we sample from the posterior distribution for $\theta_T$. ```{r} samp_treated <- generate(x = post_treated, times = 100000)[[1]] ggplot(data.frame(samp = samp_treated), aes(x = samp)) + labs(y = "Density", x = expression(theta[T])) + ggtitle(expression(paste("Posterior Samples of ", theta[T]))) + geom_histogram(aes(y = after_stat(density)), color = "#FFA21F", fill = "#FFA21F", position = "identity", binwidth = .01, alpha = 0.5) + geom_density(color = "black") + theme_bw() ``` We define our marginal treatment effect to be the difference between the active treatment mean and the control mean (i.e., $\theta_T - \theta_C$). We can obtain a sample from the posterior distribution for $\theta_T - \theta_C$ by subtracting the posterior sample of $\theta_C$ from the posterior sample of $\theta_T$. ```{r} samp_trt_diff <- samp_treated - samp_control ggplot(data.frame(samp = samp_trt_diff), aes(x = samp)) + labs(y = "Density", x = expression(paste(theta[T], " - ", theta[C]))) + ggtitle(expression(paste("Posterior Samples of ", theta[T], " - ", theta[C]))) + geom_histogram(aes(y = after_stat(density)), color = "#FF0000", fill = "#FF0000", position = "identity", binwidth = .01, alpha = 0.5) + geom_density(color = "black") + theme_bw() ``` Suppose we want to test the hypotheses $H_0: \theta_T - \theta_C \le 0$ versus $H_1: \theta_T - \theta_C > 0$. We can use our posterior sample for $\theta_T - \theta_C$ to calculate the posterior probability $Pr(\theta_T - \theta_C > 0 \mid D)$ (i.e., the probability in favor of $H_1$), and we conclude that we have sufficient evidence in favor of the alternative hypothesis if $Pr(\theta_T - \theta_C > 0 \mid D) > 0.975$. ```{r} mean(samp_trt_diff > 0) ``` We see that this posterior probability is greater than 0.975, and hence we have sufficient evidence to support the alternative hypothesis. Using the `parameters` function from the `distributional` package, we can extract the parameters of a posterior distribution that consists of a single component (i.e., a single normal distribution). For example, we can extract the mean (mu) and standard deviation (sigma) parameters of the beta posterior distribution for $\theta_T$. ```{r} parameters(post_treated) ``` For posterior distributions that are a mixture of normal components, we can extract the means and standard deviations of each component using the `mix_means` and `mix_sigmas` functions, respectively. ```{r} mix_means(post_control) # means of each normal component mix_sigmas(post_control) # SDs of each normal component ``` We can also use the `parameters` function to extract the mixture weights associated with the normal components of the posterior distribution for $\theta_C$. ```{r} parameters(post_control)$w[[1]] ``` Lastly, we calculate the effective sample size of the posterior distribution for $\theta_C$ using the method by Pennello and Thompson (2008). To do so, we first must construct the posterior distribution of $\theta_C$ *without borrowing from the external control data* (e.g., using a vague prior). ```{r} post_control_no_brrw <- calc_post_norm(filter(int_norm_df, trt == 0), response = y, prior = dist_normal(mean = mix_means(mix_prior)["vague"], sd = mix_sigmas(mix_prior)["vague"]), internal_sd = sd_internal_control) n_int_ctrl <- nrow(filter(int_norm_df, trt == 0)) # sample size of internal control arm var_no_brrw <- variance(post_control_no_brrw) # post variance of theta_C without borrowing var_brrw <- variance(post_control) # post variance of theta_C with borrowing ess <- n_int_ctrl * var_no_brrw / var_brrw # effective sample size ess ```